UL Mittens #Black｜山と道
Black / M
¥4,000
Skip to product information
1 left
Yamatomichi UL mitten (Unisex)
■Manufacturer's description quoted.
Ultra-lightweight mittens made from strips of cloth
Mittens created from UL All-weather Hoody strips.
They are not fully waterproof as they are not seamed at the seams, but like the UL All-weather Hoody, they are made of Pertex Shield Air, a breathable and waterproof material that can be used as rain mittens or wind gloves. And at just 19g, they're super lightweight, so don't hesitate to take them with you when you're not sure whether to bring gloves or not.
See support for waterproofing.
About the colour of the fabric
As the UL All-weather Hoody is made from strips of fabric, the colour of the fabric may vary very slightly from part to part.
■Material
・Pertex, Shield Air：100％
・Nylon, C6 DWR (Durable Water Repellent Process), 58g/m2
■Weight
19g(Size S)
23g(Size M)
■ Product care
Washing should be carried out at a water temperature of 30°C or less on a low-flow course.
Use a special detergent for rainwear or a neutral detergent that is bleach-, softener- and fluoro bleach-free.
For heavy soiling, apply a detergent diluted with water and wash the area with a soft sponge. Do not rub the surface joints or the seam tape on the reverse side.
-Regularly dry it in a dryer on a low temperature setting (maximum 60°C) to restore its water repellent properties.
Do not use fabric softener or bleach.
Ironing should be done at low temperature, without steam.
Do not dry clean.
Pertex Shield Pro may stain or lose its moisture permeability if products containing Vaseline, insect repellent or ethanol (e.g. hair cream, cosmetics, sunscreen, insect repellent) are allowed to adhere to the fabric.
■Precautions for use.
The product is not fully waterproof.
This product is an ultra-lightweight mitten made of ultra-thin waterproof and breathable fabric. Please be careful not to damage or tear the product due to rock scrapes, snagging on trees, etc.
The gloves are designed to be comfortable to wear when operating in relatively warm environments and provide less warmth than standard mittens of a similar weight. Please take care when using these mittens in extreme conditions, for example, wear wool gloves as innerwear when stormy weather conditions are predicted.
To ensure maximum waterproof/breathable performance, care must be taken after wearing the garment. The membrane, the water-repellent finish on the surface of the fabric and the inner layer of the fabric will each lose their performance if dirt, sweat or sebum adheres to them. Wash and dry frequently according to the washing instructions and keep clean. If the water repellent function of the fabric surface is lost, the moisture permeability will also be lost. If you feel that the water repellency has weakened, regularly apply heat to the fabric by running it through a low-temperature dryer or applying a hairdryer to it to restore its water repellency. However, repeated washing will cause the initial water repellent to wear off and the water repellency will not return even if heat is applied. In this case, use a commercially available water repellent and care for it regularly.
Due to the extremely lightweight and thin porous material, products containing Vaseline, insecticide or ethanol (e.g. hair cream, cosmetics, sunscreen, insect repellent) may adhere to the fabric, causing staining and reducing the moisture permeability function.
■ Waterproofing of seams
UL Mittens is made of waterproof material, but is not fully waterproof as the seams are not waterproofed.
To make it completely waterproof, please waterproof the seams yourself. *Specifications (logo position, colour, pattern position, etc.) may differ slightly from this product due to the use of manufacturer's images.
The specifications (logo position, colour, pattern position, etc.) may differ slightly from those of this product as the manufacturer's images are used.
山と道の通販ご利用の方は必ずお読み下さい。
・同一商品を多数注文頂いた場合、ご注文をキャンセルさせて頂く場合がございます。
・当店では、資源の有効活用・環境面より簡易包装を心がけております。山と道の一部の商品は化粧箱に入って管理されております。そのような商品の梱包も基本【紙袋】となり、配送中に化粧箱が凹んでしまう場合がございます。
Product Description.
■Manufacturer's description quoted.
Ultra-lightweight mittens made from strips of cloth
Mittens created from UL All-weather Hoody strips.
They are not fully waterproof as they are not seamed at the seams, but like the UL All-weather Hoody, they are made of Pertex Shield Air, a breathable and waterproof material that can be used as rain mittens or wind gloves. And at just 19g, they're super lightweight, so don't hesitate to take them with you when you're not sure whether to bring gloves or not.
See support for waterproofing.
About the colour of the fabric
As the UL All-weather Hoody is made from strips of fabric, the colour of the fabric may vary very slightly from part to part.
■Material
・Pertex, Shield Air：100％
・Nylon, C6 DWR (Durable Water Repellent Process), 58g/m2
■Weight
19g(Size S)
23g(Size M)
■ Product care
Washing should be carried out at a water temperature of 30°C or less on a low-flow course.
Use a special detergent for rainwear or a neutral detergent that is bleach-, softener- and fluoro bleach-free.
For heavy soiling, apply a detergent diluted with water and wash the area with a soft sponge. Do not rub the surface joints or the seam tape on the reverse side.
-Regularly dry it in a dryer on a low temperature setting (maximum 60°C) to restore its water repellent properties.
Do not use fabric softener or bleach.
Ironing should be done at low temperature, without steam.
Do not dry clean.
Pertex Shield Pro may stain or lose its moisture permeability if products containing Vaseline, insect repellent or ethanol (e.g. hair cream, cosmetics, sunscreen, insect repellent) are allowed to adhere to the fabric.
■Precautions for use.
The product is not fully waterproof.
This product is an ultra-lightweight mitten made of ultra-thin waterproof and breathable fabric. Please be careful not to damage or tear the product due to rock scrapes, snagging on trees, etc.
The gloves are designed to be comfortable to wear when operating in relatively warm environments and provide less warmth than standard mittens of a similar weight. Please take care when using these mittens in extreme conditions, for example, wear wool gloves as innerwear when stormy weather conditions are predicted.
To ensure maximum waterproof/breathable performance, care must be taken after wearing the garment. The membrane, the water-repellent finish on the surface of the fabric and the inner layer of the fabric will each lose their performance if dirt, sweat or sebum adheres to them. Wash and dry frequently according to the washing instructions and keep clean. If the water repellent function of the fabric surface is lost, the moisture permeability will also be lost. If you feel that the water repellency has weakened, regularly apply heat to the fabric by running it through a low-temperature dryer or applying a hairdryer to it to restore its water repellency. However, repeated washing will cause the initial water repellent to wear off and the water repellency will not return even if heat is applied. In this case, use a commercially available water repellent and care for it regularly.
Due to the extremely lightweight and thin porous material, products containing Vaseline, insecticide or ethanol (e.g. hair cream, cosmetics, sunscreen, insect repellent) may adhere to the fabric, causing staining and reducing the moisture permeability function.
■ Waterproofing of seams
UL Mittens is made of waterproof material, but is not fully waterproof as the seams are not waterproofed.
To make it completely waterproof, please waterproof the seams yourself. *Specifications (logo position, colour, pattern position, etc.) may differ slightly from this product due to the use of manufacturer's images.
The specifications (logo position, colour, pattern position, etc.) may differ slightly from those of this product as the manufacturer's images are used.
Accepted payment methods.
クレジットカード決済
コンビニ決済
デジタルウォレット・QRコード決済
銀行振込
ゆうちょ銀行
Cancellation, returns and exchanges
Before ordering
As a rule, we do not accept returns or exchanges of products for reasons attributable to the customer, such as "it's not what I imagined" or "the size doesn't fit." If you have any questions or concerns, please consult our staff first.
Please understand and accept the following points before ordering.
The colour and texture of the products may appear slightly different depending on the device and environment used.
The dimensions given in the product description may have slight deviations.
The product may have minor scratches and scuffs that are unavoidable during the manufacturing process.
Depending on the material of the product, there may be individual differences in colour irregularities, texture and pattern.
Cancellation of orders
As a rule, cancellations after the dispatch completion email has been sent are not accepted.
Although we make every effort to manage our stock, we reserve the right to cancel an order if we are unable to keep the ordered product in stock for an unavoidable reason.
Limit on number of purchases
The number of purchases may be limited for some products. Orders from multiple accounts that appear to be from the same person, or orders that appear to be using a BOT, may be cancelled or reduced in quantity.
*The Company does not guarantee or bear any responsibility for any loss or disadvantage caused by the cancellation.
Returns and exchanges
However, in the unlikely event that the product is damaged or defaced, or if you receive an item that is different from your order, please contact us within 7 days of the delivery date. We will take action at our expense.
If a replacement can be secured, the product will be replaced.
If a replacement cannot be secured, a refund will be made.
Returns and exchanges will not be accepted if any of the following conditions apply. Please note in advance
If more than 8 days have elapsed since the arrival of the goods
When the customer is deemed to have used the product by our company.
If the product has been repaired, washed or cleaned.
Loss or damage to accessories (product tag, warranty card, bag, box, etc.)
If smells, scratches or stains occur under the customer's care.
Products that come into contact with the skin, such as underwear, socks and accessories, perfumes and cosmetics.
If you return the goods without informing us in advance.
About the indicated prices
Every care is taken to ensure that correct product information is displayed on the website, but in the unlikely event that it is discovered after payment has been made that the price of a product was incorrectly displayed on the website, the customer will be contacted and the correct price will be corrected before payment is made or the order is cancelled.
Leave a Message
This product is sold by sharing stock with the actual shop and other shopping sites operated by our company. Stock will be checked after the order is received, and there is a possibility that the product may be out of stock in some cases. In such cases, we will inform you by e-mail.
