マイナーズランプ M #オールニッケル N20 [4573350728215]

JD Barford Miners Lamp M

■ Manufacturer's Description Quotation
Handmade product using traditional manufacturing methods
Miners Lamp "Miner's Lamp"

■ How to Use
1. Turn the bottom (base) of the lamp counterclockwise to remove it
2. Remove the wick along with the holder to access the tank's spout
3. Please fill the fuel tank with up to 20ml of paraffin oil
4. Keep the wick protrusion to 2mm from the holder
5. Return the wick with the holder to the tank
6. After lighting, return the base to the lamp part

■ How to Extinguish
1. Blow from the ventilation hole at the back of the lamp
(The lamp becomes very hot, so please be very careful)

■ Dimensions: 180(240)xΦ63mm *() includes handle dimensions
■ Materials
・ Body: Nickel
・ Globe: Glass
■ Oil Tank Capacity: Approx. 30cc (about 5 hours)
■ Weight: 395g
■ Country of Manufacture: United Kingdom (Wales)
■ Model Number: 4573350728215

■ Cautions
・ Always use paraffin-based oil lamp oil as fuel. Do not use kerosene or gasoline.
・ Do not use in environments where gas may accumulate or there is a risk of ignition.
・ The body becomes very hot after ignition. Please be careful to avoid burns.
・ Do not use for purposes other than lighting.
・ When the body is hot, if the rubber at the tip of the hook touches the body, the rubber may deform or melt.
・ Use the wick with a protrusion of 2mm or less from the holder. Using more than 2mm may cause discoloration or deformation of the main body.
・ Depending on the wick fiber spread, soot may occur even at 2mm. If soot appears, reduce the wick protrusion.
・ We recommend using metal polish for maintenance.

※ Caution ※
・ Due to the nature of the material, this product is prone to rust and other changes over time regardless of use.
We kindly ask for your understanding and acceptance in advance.
・ Models of size M produced before December 2020 do not have serial number engravings, but this is original specification and not a defect.
Returns or exchanges due to the presence or absence of serial number engraving are not accepted. Also, you cannot choose whether the engraving is present or not, so please understand in advance.

※ Manufacturer images are used, so the actual product may differ slightly in specifications (logo position, color, pattern position, etc.).