Skip to product information
116フェムトストーブII [P-116]|PRIMUS

116フェムトストーブII [P-116]

¥8,800
COLOR
SIZE
Product description

Primus 116 Femto Stove?U

■ Manufacturer's Description Quote
This is the lightest single burner among Primus gas stoves.
A wire-type knob is adopted to improve operability when adjusting the flame.
Both the three-legged pot support and the wire-type knob are foldable, making the storage size very compact.
It is suitable not only as a main burner for minimalists but also as a portable sub-burner for boiling water.

〇MFMM
Micro Fiber Metal Mesh (MFMM) is a compact burner head with high windproof effect mainly used in small stoves.
By weaving metal fibers only 22 microns thick, it creates a highly porous mesh-like burner hole.
Gas flows out on the burner head surface well mixed with air, and the flame burns rising from the burner head surface.
The flame is not affected by wind due to the windscreen installed around the burner head, achieving stable combustion.

・ Includes nylon staff bag
・ Gas cartridge sold separately

■ Output: 2.5kW / 2,100kcal/h (when using T gas)
■ Gas consumption: 170g/h
■ Burning time: about 80 minutes (when using IP-250 gas)
■ Pot support diameter: large 120mm / small 80mm
■ Storage size: 5.4×7.4×2.7cm
■ Body weight: 64g

■ Notifying business operator name: Iwatani Primus Co., Ltd.
■ Registered inspection agency name: JIA
■ Type of PS mark: PSLPG mark

※ Caution ※
・ The piezo ignition device may not function well at high altitudes or low temperatures. Please always carry spare matches or a lighter (non-electronic ignition type) during actual mountain trips or camping.
・ Output is calculated based on the amount of gas discharged over a certain period. It varies depending on the season and usage conditions.

※ Manufacturer images are used, so the specifications (logo position, color, pattern position, etc.) may differ slightly from this product.

Notes

※This product is sold sharing inventory with physical stores and other shopping sites operated by our company. Inventory confirmation will be made after order acceptance, and there is a possibility that it may be out of stock. In that case, we apologize, but we will notify you by email, so please understand.