Miner's Lamp M #Copper Brass C6 [4573350728239] | JD BURFORD

JD Burford Miner's Lamp M

■Quote from manufacturer's description
*The copper part of the copper & brass will become discolored if lit even once. This is a specification, so please be aware of this before placing your order.

Traditionally handmade products
Miner's Lamp "Miner's Lamp"

■How to use
1. Remove the base of the lamp by turning it counterclockwise.
2. Remove the wick and nozzle to create the spout for the tank.
3. Add up to 20ml of paraffin oil to the fuel tank
4. The wick should not protrude more than 2mm from the nozzle.
5. Place the wick and nozzle back into the tank.
6. Once lit, return the base to the lamp.

■ How to erase
1. Blow through the vent on the back of the lamp
(Please be careful as the lamp gets very hot.)

■Specifications
○Dimensions
・180(240)xΦ63mm ※（）Dimensions include handle
○Material
Body: Brass, copper-plated
*The copper-colored part will discolor if turned on even once, but this is not a malfunction, so please be aware of this.
Globe: Glass
○Oil tank capacity: Approximately 30cc (approximately 5 hours)
Weight: 625g

■Model number: 4573350728239

*Starting from the December 2020 production, serial numbers will also be stamped on the M size.
Models produced before December 2020 do not originally have serial numbers stamped on them, so the absence of a serial number does not indicate a defect.
Please note that we cannot accept exchanges based on whether or not the item is stamped.

■Caution
・Please make sure to use paraffin-based oil for oil lamps. Do not use kerosene or gasoline.
- Never use this product in environments where there is a risk of fire, such as in an area filled with gas, as it is dangerous.
・The body will become extremely hot after lighting. Please be careful not to get burned.
- Do not use for any purpose other than lighting.
-If the rubber at the tip of the hook touches the body when the body is hot, the rubber may deform or melt.
・Please use the wick no more than 2mm from the nozzle. Using the wick more than 2mm may cause discoloration or deformation of the main body.
・Depending on how open the wick fibers are, soot may be generated even at 2mm. If soot is generated, reduce the amount of wick protruding.
・We recommend using a metal polishing agent for cleaning.
・Once lit, the copper part of the copper & brass will have a burnt color. Please be aware that this is a standard feature.

※please note※
Due to the nature of the material this product is made of, it is prone to rust and other problems over time, regardless of whether it is used or not.
We apologize for any inconvenience caused and appreciate your understanding in advance.

*Since we use manufacturer images, the specifications (logo position, color, pattern position, etc.) may differ slightly from this product.